CLASSIC PORSCHE SPECIALISTS

G50 5 Speed Ring & Pinion

Select an option to see price $2,733.25

IMPORTANT for ratio 08:33 4.125: Due to the Crownwheel being thicker, some minor clearing of the housing will be required near the input shaft hole. Special care should be taken as excessive grinding will weaken the housing.

08:32 4.000 vs 08:32 4.125

Specifically looking for the 08:32 4.000 ring and pinion set? Consider the 8:33 4.125 ring and pinion set! The 08:33 will provide a quicker acceleration as it is 3% shorter(lower) than the 08:32 4.000

Common and modern tires tend to run a larger tire diameter; therefore lengthening your overall ratio (gain speed while sacrificing acceleration) compared to smaller tire sizes in the past. The 08:33 4.125 ring and pinion set overcomes that difference.

Finally, the 08:32 4.000 is a non-hunting tooth ring and pinion. Once installed, the same tooth contact between the ring gear and pinion will occur indefinitely. The 08:33 is a variable-tooth-contact ring and pinion, so the contact tooth between the ring gear and pinion will rotate around. As a result, the wear is distributed evenly, and will increase the longevity of the ring and pinion.

* Required

All gears available online are in stock and ready to ship worldwide.

  • Installation Guide
  • About Retro Sport Gears
  • Porsche Gear Calculator
  • Questions? Contact Us
  • Shipping & Return Policy